Description
- Operator Interface of 15-inch colour LCD touch screen.
- Enclosed Tissue treatment system with no pollution or gas leakage, to meet the requirements of environmental protection.
- Mode of Sample processing: Sample not moved, Reagent move.
- It can avoid the risk of a power failure of the machine or other mechanical failures.
- Timing Mode: The Finishing time of tissue processing on any day of the week can be set
- Function of the Protection System of Power Failure. Once the main power is restored, the previous protocols are automatically resumed and continue to work in order.
- 10 Set of Programmers stored in the system and can be set for a purpose.
- Special design of Reagent Station makes the liquid totally back-flow to avoid any mixture and to extend the use time of the reagent.
- Patented design of cassette holder makes reagents and samples thoroughly contact with each other, which improves the efficiency of tissue processing and reduces working time.
- Dual Purpose of processing: one key switch normal processing motion and Rapid processing motion
- Rapid Processing motion stirred in day daytime and finished in 3 hours, Normal Processing Motion stirred in the evening.
- Device for Air pressure transfer: Formal air pressure transfer of several solenoid valves replaced by one single mechanical structure replace formal in order to avoid high fault error.
- Function for changing wax automatically: Wax in No.1 Container washes into the waste container, then, wax in NO.2 container goes into No.1 Container, then, No.3 goes into No.2, and so on
- The function of over-temperature protection occurred due to accidental heating
- Function for magnetic stirring, which shortens the time of tissue processing and achieves good processing efficiency.
- Alarm and Screen display when finishing work.
- Capacity of tissue processing: 300 pcs cassette at most.
Specifications
| Model | CA-TSP-CV1 |
| Number of Reagent Stations | 12 |
| Tissue Processing Station | NO.1 to No.9 Station |
| Washing Station | No.14 to No.16 Station |
| Number of Wax Tanks | 3(No.10,12 and 13) |
| Number of Working Stations | 1 |
| Capacity of Processing Station | 9L |
| Capacity of Reagent Station | 6L |
| Temperature of Processing Station | Medium is the solvent: ≤45℃ |
| Medium is the Wax: 58℃-70℃ | |
| Operation pressure | ＜0.1Mpa |
| Wax temperature | 58℃-70℃ |
| Wax melt time | ＜3 hours |
| Power input | ＜1500VA+10% |
| Time for immersion | 0 – 99 hours 59 minutes |
| Working Voltage | 220VAC±10%,50/60HZ |
| Time for Inflow Liquid | no more than 5Min |
| Time for Exclude Liquid | no more than 5Min |
| Stirring time | set randomly |
| Interval time for Stirring | set randomly |
| Operation mode | manual and automatic |
| Overall Dimension | 650×650×1350mm(W×D×H) |
| Net Weight | 145kg |
Reviews
There are no reviews yet.